GIP Wire Prices are Competitively Low & Transparent - despite Brass Cost increases

Visit GIP Online Store www.GIP-EDMWire.com and check out our high performance wire prices.

Despite significant increase in Brass prices our prices have stayed the same.

There is also a special offer available, GIP is offering a FREE Spool of PLASMA™ Hybrid-Coated EDM until the end of October, just pay $10 for shipping and handling.

Visit our special website contact page to request your Free Spool of PLASMA™ Hybrid-Coated EDM

Brass Costs #3.png

FREE Spool of PLASMA™ EDM Wire - Visit WEDM GIP Online Store with Transparent Prices

Plasma.jpg

GIP PLASMA™ Hybrid EDM Wire Delivers 20% Improvement in Speed and Productivity

    • Reduces operating costs

    • Exceptional cleanliness

    • 20% faster than plain brass wire

    • Improved flushing

    • Uses standard Brass setting

Now receive a FREE Spool of PLASMA™ Hybrid EDM Wire

JUST PAY $10.00 for Shipping and Handling & Sign up for our mailing list

THERE IS A LIMIT OF ONE FREE SPOOL PER COMPANY.  

Offer is EXTENDED until 31st October 2020

Copy of Copy of FREE Spool of PLASMA™Hybrid EDM Wire-2.png

TESTING GUIDE FOR PLASMA™ HYBRID-COATED EDM WIRE

Tech Talk: Outlined below are suggestions when testing PLASMA™ Hybrid Coated EDM Wire...or any high performance product.

These steps outlined below are a guide.

All applications are different. Results will vary. We invite customers to see what results they observe/notice.

 1) Put the wire on and do nothing. The machine should sense the gap opening and show a modest increase due to the "coating".  

2) Next increase the "on time". Let the machine stabilize. Decrease the "off time". Let the machine stabilize.

3) Repeat step two until the wire breaks. Then back off to the previous setting where it was stable.

4) Back off on the wire feed rate. Ex. If the wire was coming off the spool at 10 meters per minute through the gap, back off to 9 per minute and so on till the wire breaks. Then go back to the previous setting.

The idea is to push the wire to reveal all benefits.

Overall benefit: Ideally the customers will see an increase in cutting speed and less wire consumed.

Buy PLASMA™ Hybrid Coated EDM Wire at the GIP EDM Wire ONline Store

Buy PLASMA™ Hybrid Coated EDM Wire at the GIP EDM Wire ONline Store

PLASMA™ HYBRID-COATED EDM WIRE - GIP implemented an IN USE TEST with CLIPPARD based in CINCINNATI, OHIO. 

CLIPPARD USES GIP PLASMA Hybrid Coated EDM Wire FOR EDM OPERATIONS, REALIZES 15 to 20% IMPROVEMENT IN SPEED

TREVOR MCCOY, CNC/EDM PROGRAMMER AT CLIPPARD, RUNS A FANUC WIRE EDM WITH THE GIP PROPRIETARY PLASMA COATED BRASS WIRE. MCCOY STATES HE ACHIEVES BETTER FINISH WITH 15 TO 20% IMPROVEMENT IN RUN TIME. (MACHINE HOOD OPEN ONLY FOR PHOTO PURPOSE)

TREVOR MCCOY, CNC/EDM PROGRAMMER AT CLIPPARD, RUNS A FANUC WIRE EDM WITH THE GIP PROPRIETARY PLASMA COATED BRASS WIRE. MCCOY STATES HE ACHIEVES BETTER FINISH WITH 15 TO 20% IMPROVEMENT IN RUN TIME. (MACHINE HOOD OPEN ONLY FOR PHOTO PURPOSE)